K-FLEX HT roll insulation
K-FLEX HT elastomeric foam insulation, which is made of ethylene propylene diene monomer EPDM, was marketed with the aim of saving energy in home solar systems and use in some special industries.
Higher temperature tolerance up to 150+ is one of the most important features of this insulation, which is considered in some special industries.
Also, the resistance to UV rays in this insulation is higher compared to K-FLEX ST, but it is still recommended to use this insulation outdoors with a cover.
Technical Specifications
Title: K-FLEX HT roll insulation
model: HT
brand: K-FLEX
type : Roll
thickness (mm): 9-13-16-19-25 mm
size (in): 1000 mm
installation: need for stick
Heat transfer coefficient (kg/m³): In accordance with INSO 8621 EN12667 standards
country: Italy
Technical Specifications
| Technical Specification | Results | Description |
| Standard Thickness | 6-9-13-16-25- mm | |
| Roll Width | 1000 mm | |
| Nature | Ethylene Propylene DN Monomer | |
Thermal conductivity (Termal conductivity-w/mk) | y=0.039 10'c y=0.044 40'c | In accordance with ISO 8621 EN 12667 |
| Energy saving percentage | 65%=>94% | The percentage of energy saving is different based on thickness and implementation conditions in this range |
| Working temperature range | -40 --- +105 | For temperatures lower than -20 degrees, it is necessary to consult with the company's technical experts |
| Useful life | More than 30 years | Choosing the right thickness and correct implementation is effective in the life of the insulation |
| Reaction to fire | Slow burning and self-extinguishing Euroclass E | In accordance with EN 13501 |
| Short-term water absorption coefficient | less than 8% of the initial weight | In accordance with ASTM C209, EN 1207 |
| Resistance to water vapor penetration | μ>3500 | In accordance with DIN EN12086 , INSO 7299 |
Less installation time
contact us
Contact us for more information and advice
